3BCAD 1.2 is out: text on parts and splitting for the print bed
3BCAD 1.2 shipped today, on launch day. Both features you voted for in the roadmap thread made it in.
Text on parts: the Text sketch tool writes lettering in any installed font, with a height and angle, or along a line, arc, circle or spline. Every letter is a profile, so emboss it with Extruded Boss or deboss it with Extruded Cut. The outlines are saved in the part, so the lettering survives on machines without the font.
Split for printing: on the 3D Print tab, cut a part that's too big for your bed by one or more planes. 3BCAD adds alignment pins across each cut at a fit clearance (slip fit for your material by default), either standing on one piece or as separate dowels. Pin size and clearance can be driven by equations.
Fixes: STL/3MF exports of round bosses and cuts on a face are now watertight, bosses and cuts with holes (washers, the letters O and A) no longer fail, and STEP import is closer to OpenCASCADE (its screw sample no longer comes in 44% too small, NIST CTC-02 and STC-07 open correctly).
If you're on 1.1 the app offers the update itself. Next up is sheet metal in 1.3. Try embossing a label on a part you actually need and tell us where it got stuck.


Replies
Be the first to reply
Have a question or a thought to share? Add a comment above to start the conversation.